45

YEARS

 


Home

Distributors

Overview
   Shears & Corner
     Systems

Shears
   1001
   2001
   3001
   4001
   Air Power!

Corner Systems
   Cornermate
   Cornermate PLUS
   080 Cornermate

Comparison Charts
   Shears
   Corner Systems

Precision Slip Roller & Column Maker

Punches
   Hand Punch
   Bench Punch

Other Products
   Beveler
   Strip Heater
   Walnut Desk Set

Contact Info
   717-241-2330
   717-241-2350 Fax
   accutter@aol.com

   Mailing Address:
      PO Box 1170
      Carlisle, PA 17013

   Shipping Address:
      160 Stover Drive
      Carlisle, PA 17015




Model No. 16
Medium Duty Bench Punch
by Roper Whitney
 

Need to punch a hole in a sign blank? Need to punch two holes in 50 sign blanks? In aluminum? In steel?

The No. 16 punch by Roper Whitney can do that and more with ease. It has a solid forged frame and a rated capacity of 7.3 tons. It will punch a 1/4" hole in 1/4" mild steel!

Bench mounting is required for safe operation.

Features
     · Linear Roller Bearing Cam Operation
     · Includes one 9/32" round punch and die
     · Adjustable die shoe for precise punch and die alignment
     · Interchangeable punch and die sets

Dimensions
      · Height (without handle) - 9 5/8"
     · Width - 3 7/8"
     · Depth - 8 7/16"
     · Handle - 24 1/2"
     · Throat depth - 3 1/4"
     · Jaw Opening - 3/8"
     · Weight - 26 1/2 pounds

Alignment Table
     · A work/alignment table with work stops is available. (8" x 6")

Punch & Die Combinations
     · Standard hole punches from 1/16" - 9/16”
     · Inquire about the availability of additional shape punches.

Model No. 16, $473.00
Alignment Table, $77.00
Standard Punch & Die Set, $28.00


*     *     *     *     *

Model No. 17
Medium Duty Bench Punch
by Roper Whitney

The No. 17 is similar in use to the No. 16 above. However, it is constructed with a steel frame instead of a forged frame, and it also has a throat depth of 6 1/2" versus the 3 1/4". As a result it has a smaller rated capacity of 5 tons. While it will not punch a 1/4" hole in 1/4" steel, it is still more than adequate for sign blanks.

Bench mounting is required for safe operation.

Features
     · Linear Roller Bearing Cam Operation
     · Includes one 9/32" round punch and die
     · Adjustable die shoe for precise punch and die alignment
     · Interchangeable punch and die sets

Dimensions
      · Height (without handle) - 10 9/16"
     · Width - 4 1/2"
     · Depth - 12 3/8"
     · Handle - 24 1/2"
     · Throat depth - 6 1/2"
     · Jaw Opening - 3/8"
     · Weight - 38 1/2 pounds

Alignment Table
     · A work/alignment table with work stops is available. (8" x 6")

Punch & Die Combinations
     · Standard hole punches from 1/16" - 9/16”
     · Inquire about the availability of additional shape punches.

Model No. 17, $550.00
Alignment Table, $77.00
Standard Punch & Die Set, $28.00
 

Prices and specifications are subject to change without prior notice.

061508