The 080 Cornermate is a new heavy-duty cornering system designed, developed and manufactured by accucutterŽ. It is for .080" Aluminum and .250" flexible plastic.

The 080 Cornermate system consists of the 080 Cornermate Table and the 080 cutting units. The table includes an adapter plate and a reversible guide to permit the use of all of the 080 cutting units regardless of size. The table is mounted on a standard arbor press.

Like all Cornermate cutting, the alignment system is part of the 080 Cornermate cutting unit so it is always properly aligned. The 080 Cornermate cutting units also have replaceable steel alignment guides. In the event that the guides wear through use, they may be replaced restoring the proper alignment of the cutting unit. Another accucutterŽ first.

An enhanced version of the 080 Cornermate Table has been developed. The  enhanced table, the CM80SPCL, is also based on an arbor press and very similar to original but with two important differences. It is approximately six inches wider, and a pivoting disc or adapter has been added. The disc/adapter has two positions. In one position, the disc/adapter places  the punch at an angle to the operator for convenient corner punching. In the other position, the disc/adapter places the punch square to the operator for more convenient slot punching. The CM80SPCL table has additional tapped holes that can be used to set up stops or guides for repetitive slot punching. All of the 080 cutting units will work with the CM80SPCL.

The 080 Cornermate tables and cutting units are sold separately.

061508